EN
WEIYE SEPAT SF-25T Hot Selling Portable AC Evaporative Cooling Fan Solar-Powered New Plastic Desert Air Conditioner for Outdoor Garage Hotel Use
Description
The WEIYE SEPAT SF-25T is a hot-selling portable AC evaporative cooling fan engineered for outdoor, garage, and light commercial environments where reliable spot cooling is needed without the installation complexity of fixed air conditioning. Powered by standard 230V AC, the unit moves 2,500 m³/h of air through a 20-liter water tank to cool spaces of 10 to 15 square meters. Three mechanical speed settings and a robust ABS body make the SF-25T equally suited to hotel courtyards, residential garages, outdoor restaurant terraces, and workshop floors. At approximately 8.6 kg net weight, it strikes a practical balance between cooling capacity and portability, allowing staff to reposition the unit as shade patterns and customer traffic shift throughout the day. Manufactured by Taizhou Weiye Refrigeration Equipment Co., Ltd., the SF-25T has become a popular choice among distributors in desert and warm-climate regions for its straightforward design and dependable performance.
Key Features
20-Liter Tank for 4-7 Hours of Operation
The 20-liter water capacity supports continuous cooling for most of a workday or evening event on a single fill. The tank is positioned for easy access and includes a visual water level indicator so staff can refill during routine checks without disassembling the unit.
2,500 m³/h Airflow with 3 Mechanical Speeds
The SF-25T delivers a steady 2,500 m³/h of airflow across low, medium, and high settings. The mechanical speed selector is robust and reliable in outdoor conditions where dust and humidity can impair electronic controls. High speed is effective for rapid cooling of garages and workshops after morning heat buildup, while low speed maintains comfort in covered hotel terraces and dining areas.
ABS Body Resistant to Sun, Dust, and Impact
The UV-stabilized ABS cabinet resists fading and cracking under prolonged sun exposure. The material also withstands the incidental impacts common in garage and workshop environments, ensuring the unit maintains its appearance and structural integrity after repeated repositioning.
Low Power Draw for Cost-Effective Operation
At approximately 100 watts, the SF-25T consumes significantly less electricity than compressor-based units. For hotels and small businesses operating on tight margins, this low energy requirement translates to lower operational costs during peak summer demand.
Wide Air Distribution for Open Spaces
The oscillating louvers and high fan throw spread cool air across a broad area rather than directing it in a narrow stream. This wide distribution pattern is more effective in open garages, hotel lobbies, and outdoor dining areas where multiple occupants need cooling coverage.
Technical Specifications
| Model name | SF-25T |
| Cooling area | 10-15m2 |
| Air distance | 4-6m |
| Airflow | 2500m9/h |
| Voltage power | AC230V/95W |
| Control type | Mechanical |
| Speed | 3 |
| Water tank | 20L |
| N.W. | 8.6kg |
| G.W. | 10.2kg |
| Packing size | 54*34.5*70cm |
| 40HQ QTY | 520 sets |
Applications
Hotel Outdoor Terraces and Pool Areas: Provides guest comfort in al fresco dining and lounging areas without the cost of permanent HVAC infrastructure.
Residential Garages and Carports: Reduces heat buildup for homeowners working on vehicles, hobbies, and storage projects during summer afternoons.
Restaurant Outdoor Seating: Extends comfortable dining hours on patios and verandas, improving customer satisfaction and table turnover during hot weather.
Light Workshops and Repair Bays: Spot cooling for mechanics, woodworkers, and DIY enthusiasts in spaces where compressor AC is not installed.
Event Venues and Temporary Structures: Portable cooling for wedding receptions, community gatherings, and market stalls in tents and covered halls.
Manufacturing & Quality Assurance
Taizhou Weiye Refrigeration Equipment Co., Ltd. has specialized in home appliances - including evaporative air coolers and electric heaters - since 2007. Operating from a 10,000+ m² production facility with four active assembling lines and approximately 120 skilled employees, the factory maintains a daily output capacity of 1,500 to 2,000 units and ships products to over 16 countries across Europe, North America, South America, Southeast Asia, the Middle East, and Africa.
Every unit undergoes a full QC inspection before shipment, including motor performance testing, water tank leak testing, battery charge/discharge cycling, and cooling efficiency verification. The factory holds ISO 9001 quality management certification, and SEPAT-brand products have passed CCC, CE, FCC, CB, ROHS, and PSE certifications - backed by over 47 patent certificates - meeting safety and performance requirements for diverse international markets.
OEM and ODM services are available. Buyers can customize body color, branding, packaging, and select optional accessories to match local market requirements.
Frequently Asked Questions
Installation & Setup
Setting up the SEPAT evaporative air cooler takes less than 10 minutes and requires no specialized tools or professional installation. Place the unit on a flat, stable surface near an open window or doorway — this is important because evaporative cooling works best with a steady supply of fresh outside air. Fill the water tank through the top or side access port until the water level indicator shows full. If your model includes an ice box compartment, add frozen ice packs for an extra cooling boost. Plug the power cord into a standard AC outlet (for AC models) or connect to the DC power source (for DC/solar models). Select your desired fan speed and activate the cooling pump function. For optimal performance, position the cooler so that the airflow is directed toward the area where people gather, and keep a window slightly open on the opposite side of the room to allow proper air circulation and prevent humidity buildup.
Why Choose SEPAT Over Conventional Air Conditioning
For distributors and commercial buyers, the value proposition of evaporative cooling extends far beyond the purchase price. A SEPAT air cooler typically consumes 100 to 250 watts of electricity — roughly the same as two incandescent light bulbs — while a comparable split-system air conditioner draws 1,000 to 2,500 watts. Over a single cooling season in a warm climate, this difference can translate into hundreds of dollars in electricity savings per unit. Maintenance is equally straightforward: cleaning the water tank and replacing the cooling pad once per season are tasks that any end-user can perform, eliminating the need for costly HVAC service calls. Furthermore, because evaporative coolers contain no refrigerants, they are not subject to increasingly strict environmental regulations on HFCs and HCFCs, making them a future-proof product category for markets with tightening emissions standards. For businesses operating in dry and semi-arid regions — which cover much of the Middle East, Africa, Australia, and the southwestern United States — evaporative cooling is not just an economical alternative but often the most practical solution, as it actually adds beneficial moisture to dry indoor air rather than stripping it away.
How Evaporative Cooling Works
Evaporative air cooling is a natural, energy-efficient process that mimics the cooling effect of a sea breeze. Inside the unit, a water pump circulates water from the tank to the top of a honeycomb cooling pad. As warm outside air is drawn through the wet pad by the fan, the water evaporates, absorbing heat from the air and lowering its temperature by 5–15 °C before it is discharged into the room. Unlike compressor-based air conditioners that recirculate stale indoor air, evaporative coolers continuously introduce 100% fresh, filtered outside air, making them healthier for prolonged use and far cheaper to operate — typically consuming only 10–20% of the electricity of a comparable AC unit. The SF series coolers from Taizhou Weiye enhance this principle with thick 5090-grade cooling pads and powerful motors that maximize evaporative surface area and airflow volume. No refrigerants, no compressor, no closed-loop ductwork — just water, air, and physics.
Q1: What is the Minimum Order Quantity (MOQ) for SEPAT evaporative air coolers?
A: Our standard Minimum Order Quantity (MOQ) for any single model is one 40HQ shipping container (loading quantities generally vary from 140 to 850 units depending on the specific model's chassis and tank capacity). This single-container threshold applies to both our standard SEPAT configurations and customized OEM/ODM production runs. Sample orders for laboratory quality checks are welcomed prior to bulk contract finalization.
Q2: What is your standard B2B production lead time?
A: For standard SEPAT stock configurations, shipment takes 15–20 days. For custom OEM/ODM production runs, shipment occurs within 25–30 days after packaging artwork confirmation and deposit receipt.
Q3: How do you support overseas distributors with aftermarket warranties?
A: We stand behind our quality with a solid 1-Year Comprehensive Warranty on all SEPAT air cooler models. To ensure uninterrupted service in your territory, we ship 1% Free-of-Charge (FOC) essential spare parts directly inside your 40HQ container orders.
Q4: What is the container loading capacity for SEPAT air cooler models?
A: Because our product line ranges in water tank capacity (from 6L to 80L+), the loading quantity per container depends entirely on the specific product dimensions. Typically, one 40HQ container can accommodate between 140 to 850 units. Once you select your desired models, our logistics department will provide a highly optimized, precise container loading layout (Loading List) to maximize your ocean freight efficiency.
Email: [email protected]
Tel: +86-13957663596
Address: NO.699 Qinglongpu Road, Binhai industrial zone, Luqiao District, Taizhou, Zhejiang, China
